ET 642 Weekly Schedule: Topics Covered and Assignments
Week 1
Course Syllabus and Requirements
Introduction to Automation
PLC fundamentals:
Overview of VCL procedures
Overview of Automation Studio: Pneumatics Module, Electrical Module, AB-PLC Module, and HMI module.
Tags and the Variable Manager
Wiring inputs and outputs
Assignments: Complete the online PLC tutorial: http://www.plcs.net/contents.shtml
Read appropriate sections from the PLC-E book:
http://sites.google.com/site/automatedmanufacturingsystems/
Lab 1 – Linear Circuit – Automation Studio using AB-PLC Simulator
Week 2
Continuation of PLC fundamentals using AB-PLC and Automation Studio
Fundamentals of Timers and counters
A-B Timers and counters syntax
Assignments: Reference sections from the PLC-E book as needed.
Complete Lab 2: Four-way Traffic Light
Week 3
Continuation of A-B PLC applications
PLC development of a drilling/processing system.
Assignment: Complete Lab 3: Drilling Work station System
Week 4
Introduction to Sequential Function Chart (SFC) programming.
SFC structure and syntax
STEPS and TRANSITIONS
Implementing timers and counters
SFC development in Automation Studio
Using the Guided Mode in Automation Studio
Assignments: Read and reference appropriate sections in the SFC Manual
(located under the HELP menu in Automation Studio).
Week 5
Review of LabView
Data Flow Programming
VI and sub-VI development
Review of NI Automation and Measurement (MAX)
Configuration of the DAQ 6009
Complete review tutorials of LabView as needed from the San Diego State Site
(http://attila.sdsu.edu/me205/modules/labview.html)
Assignment: Complete Lab 5: Temperature Monitoring
Week 6
Introduction to Vernier Sensors and the Vernier DAQ unit
Configuration of the Vernier DAQ
Assignment: Lab 6: Self-directed Lab using LabView and Vernier sensors.
Week 7
Using non-Vernier sensors.
Configurations
Methods of interfacing
Approaches to measuring, strain, temperature, flow, and pressure.
Assignment: Lab 7: Self-directed sensor lab (non-Vernier) using LabView.
Week 8
Intro to Mathscript.
Mathscript syntax
LabView procedures for implementing Mathscript
Assignment: Lab 8: System processing and monitoring using LabView and
Mathscript.
Weeks 9-10: Training sessions and presentations.
Weeks 12-14: Project work. Development of
system integration, control and monitoring.
Week 14: Final report for project due
Project demonstration and presentation.