ASSIGNMENT #2: A.
Bruce textbook: Read Chapter 1.
DUE 2/1
B. Read through Module 2.
Begin working on questions for Module 2
(Note: problems will be due 2/4)
C. Review Chapter 2 on the Russ
CD.
D. Continue working on project proposal.
ASSIGNMENT # 3:
THIS WEEK'S MODULE WILL ONLY BE A VERY BRIEF
SUMMARY
DUE 2/8
OF MATERIAL PRESENTED IN THE BRUCE TEXT AND RUSS CD.
QUESTIONS WILL BE TAKEN FROM THE TEXT RATHER THAN THE MODULE.
A. Bruce textbook: Read Chapter 4.
B. Review Chapters 8,9,11 on Russ CD
C. Answer the questions at the end of Chapter 4 (Bruce Text)
Including the 2 case studies.
(Note: Questions will be due 2/11).
D. Finalize Project Proposal.
Assignment # 4 :
Polymers and Polymer Processing
Due
2/20
A. Read Brue Textbook: Chapter 17
B. Complete Modules 4 & 5 - Polymers and Processing
Assignment # 5:
Lab - Saturday February 20 - 10:00 a.m. -
2:00 p.m.
Lab 1 - Tensile Testing
Lab 2 - Heat Treating/Hardness Testing/Grain Structure
Lab 3 - Polymer Processing : Injection Molding
Assignment # 6:
Complete Lab Write - Ups
Due
3/12
Assignment # 7:
Complete Optional Mid-Term Test
Due
3/15
Assignment # 8:
Field Work on Project: Week of
March 1.
Assignment # 9:
Read Chapter 7 - Bruce Text
Due
3/19
Read Chapter 8 - Bruce Text
Complete Module 6 on Quality
Work Problems for Module 6 (Due 3/19)
Assignment # 10:
Read Chapter 9 - Bruce Text
Due
3/29
Answer Questions 1-6
Read Chapter 10- Bruce Text
Answer Questions 1-5 AND Case # 1
Read Chapter 11 - Bruce Text
Answer Questions 16-20 AND Case #3, Part 1
Review Casting, Forming, and Machining from the following
link
Engineering Zone (click here to go)
Assignment # 10:
Read Chapter 13 - Bruce Text
Due
4/5
Answer Questions at end of chapter
Read Chapter 15- Bruce Text
Complete Module 7 on Productins Systems
Comlete the Assignment on CNC-Posted at the end of Module 7.